《中国康复理论与实践》 ›› 2004, Vol. 10 ›› Issue (05): 318-319.

• 临床研究 • 上一篇    下一篇

颅骨成形术中的计算机个性化辅助设计6例报道

周敬安1; 赵亚群1; 颜绪涛2; 汪伟3   

  1. 1.解放军309医院神经外科 北京市 100091;2.清华大学企业集团 北京市 100084
  • 收稿日期:2004-03-14 出版日期:2004-05-25 发布日期:2004-05-25

Individualized computer-aided design project for cranioplasty:6 case report

ZHOU Jing-an, ZHAO Ya-qun, YAN Xu-tao, et al   

  1. Department of Neurosurgery,309 Hopital of PLA, Beijing 100091, China
  • Received:2004-03-14 Published:2004-05-25 Online:2004-05-25

摘要: 目的研究一种中国大陆地区实用的颅骨成形术的计算机个性化辅助设计方案。方法对6例颅骨缺损患者,行头颅超薄CT扫描,三维重建,模拟缺损颅骨的形状和曲度,应用激光快速成形技术,制作缺损颅骨及补片模型,患者认可后,应用压模技术,制作硅橡胶涤纶网补片,做为植入材料。结果 6例患者塑形满意,几乎恢复原有容貌,平均手术时间缩短。结论设计出颅骨成形术的计算机个性化辅助方案,有推广价值。

关键词: 颅骨成形术, 补片, 计算机辅助设计

Abstract: ObjectiveTo study a practical individualized computer-aided design project for cranioplasty in Chinese mainland. Methods6 patients with cranial defect was performed superthin skull CT,three-dimension reconstruction. The template for the skull defected was made simulating the shape and contour of cranial defect. after patient,s consent,silicone rubber terylene patch was made as a substrate for the repair of cranial defect. ResultsThis project provides a good result,especial an excellent cosmetic result. No side-effect appears,operation time is shorter than ever.ConclusionAn individual project for computer-assisted cranioplasty has been finished,which can be popularized for its value.

Key words: cranioplasty, patch, computer-aided design